Comments on: Convert an Omni 3740 or 3750 for Ethernet Processing

By: andrew

andrew — Wed, 03 Feb 2010 21:00:59 +0000

Are you still offering Verifone Omni Dual Comm Ethernet Module?

By: Dux

Dux — Mon, 18 Jan 2010 23:28:15 +0000

Can someone please direct me to the cellular (wireless) module for the 3750. Having difficulty finding this Advanced Communications Module. Thx

By: calvin

calvin — Sat, 03 Oct 2009 02:41:02 +0000

I switched to dual comm module but my problem is its not running any faster than it did with dial up about 12 seconds. My dsl is running bet 5.0 and 5.8 mbps. I thought it was supposed to run at 2 to 4 seconds? can someone help please?

By: Anders Green

Anders Green — Fri, 28 Aug 2009 20:05:03 +0000

Bob Said: then for some reason the terminal stops recognizing the ethernet connection.

I’ve seen this. It happens when the IP addresses get reassigned, generally after a power outage. Resetting/rebooting the whole system (routers and card machines) seems to get it back on track.

By: bob reiber

bob reiber — Wed, 26 Aug 2009 16:40:49 +0000

has anyone tried using a verifone (3730,3740 or 3750) dial terminal connected to a Magic Jack? this looks on the surface to be a very cheap way of converting a dial terminal to ip if it works

By: bob reiber

bob reiber — Wed, 26 Aug 2009 16:38:52 +0000

i have seen the following problem on a couple of 3750′s and wonder if anyone else has seen it and found a fix for it. we have converted several 3750′s from dial to dual comm and they work great. then for some reason the terminal stops recognizing the ethernet connection. the dial connection still works. i have tried reloading it but that does not change anything. my only thought is that the power supply is getting weak – i guess i will have to purchase a new supply to verify this theory unless anyone else has any thoughts.

By: DawnDee

DawnDee — Mon, 24 Aug 2009 20:24:25 +0000

do you know if the verifone omni3750 could be used with the new magicjack rather than a landline my business is in a rural town in AZ and I have one phone company to choose from that is absolutly outragously priced hence the magicjack I use and I was hoping that I could hook it up thru that instead of having to use the rediculously priced telephone company. or I have been reading some of the other comments about possibly hooking it up to go thru your computer. i need advice please help Thank you

By: David Truby

David Truby — Mon, 03 Aug 2009 03:51:44 +0000

Hey Bonnie-
We have the dual com module for sale go to http://www.merchantservicescomplete.com/catalog/index.php

By: Bill Madden

Bill Madden — Wed, 20 May 2009 17:08:24 +0000

Will this conversion handle the datacomm for an attached check reader? The check reader is connected to the RS232 port and has it’s own phone line.

By: Anders Green

Anders Green — Fri, 20 Mar 2009 18:37:56 +0000

I have now answered at least part of my question. Within the setup modes, there is a “Unit Report” that will show you some info about what is installed. Mine showed “Ram 2048″ and “Flash 2048″. I have installed the ethernet/phone hardware replacement module and it is currently working. So if you have that much or more, it will work. If you have less, I have no idea what would happen.

Be sure before you download new software that you erase all the flash, as it may have space to download the new code without errors, but then not enough to process/unpack the new code.

Also, a note: although you can’t see it in the above pictures, on the bottom of the unit is a jack for a standard phone line, which the unit will use as a backup.